QAYTA JIHOZLANGAN AVTOMOBILLAR QO‘L BOSHQARUVI QISMLARINI SINOVDAN O‘TKAZISH
Keywords:
qo‘l boshqaruvi, qayta jihozlangan avtomobil, avtomobil xavfsizligi, sinov metodologiyasi, ishonchlilik, ergonomika, nogironligi bo‘lgan haydovchilar, sinov stendi, elektron boshqaruv tizimlari.Abstract
Ushbu ilmiy-tadqiqot jismoniy imkoniyati cheklangan shaxslar uchun maxsus qayta jihozlangan avtomobillarning qo‘l boshqaruvi tizimlari ishonchliligi va xavfsizligini ta’minlashga qaratilgan. Tadqiqotda qo‘l boshqaruvi qismlarini sinovdan o‘tkazishning mavjud amaliyotlari tahlil qilinib, ularning samaradorligini oshirish maqsadida keng qamrovli va kompleks sinov metodologiyasi taklif etiladi. Mazkur metodologiya laboratoriya, stend va yo‘l sinovlarini o‘z ichiga olib, boshqaruv tizimlarining mexanik mustahkamligi, chidamliligi, eskirishga chidamliligi, ergonomikasi va funksional xavfsizligi kabi muhim jihatlarini baholashga imkon beradi. Tadqiqot natijalari qayta jihozlangan avtomobillar uchun qo‘l boshqaruvi tizimlarini sertifikatlash jarayonlarini takomillashtirishga, shuningdek, me’yoriy-huquqiy bazani yangilashga xizmat qiladi.References
[1] M. Akamatsu, P. Green, and K. Bengler, “Automotive technology and human factors research: Past, present, and future,” 2013. https://onlinelibrary.wiley.com/doi/abs/10.1155/2013/526180
[2] J. Wishart, S. Como, U. Forgione, and J. Weast…, “Literature review of verification and validation activities of automated driving systems,” 2020. https://www.researchgate.net/profile/Jeffrey-Wishart/publication/349067126_Literature_Review_of_Verification_and_Validation_Activities_of_Automated_Driving_Systems/links/6022b3e0a6fdcc37a815b118/Literature-Review-of-Verification-and-Validation-Activities-of-Automated-Driving-Systems.pdf?origin=journalDetail&_tp=eyJwYWdlIjoiam91cm5hbERldGFpbCJ9
[3] N. Zaman, “Automotive electronics design fundamentals,” Springer, 2015. https://link.springer.com/content/pdf/10.1007/978-3-319-17584-3.pdf
[4] R. Isermann, “Automotive Control,” Springer, 2022. https://link.springer.com/content/pdf/10.1007/978-3-642-39440-9.pdf
[5] I. Grobelna, D. Mailland, and M. Horwat, “Design of Automotive HMI: New Challenges in Enhancing User Experience, Safety, and Security,” Applied Sciences, 2025. https://www.mdpi.com/2076-3417/15/10/5572
[6] F. Naujoks, K. Wiedemann, and N. Schömig…, “Towards guidelines and verification methods for automated vehicle HMIs,” 2019. https://www.sciencedirect.com/science/article/pii/S1369847818301748
[7] Q. V. E. Hommes, “Assessment of safety standards for automotive electronic control systems,” rosap.ntl.bts.gov, 2016. https://rosap.ntl.bts.gov/view/dot/12302
[8] J. Quigley, “SAE International’s Dictionary of Testing, Verification, and Validation,” books.google.com, 2023. https://books.google.com/books?hl=en&lr=&id=QTbhEAAAQBAJ&oi=fnd&pg=PP1&dq=modified+vehicle+hand+controls+testing+procedures,+automotive+hand+control+validation+methods,+vehicle+modification+safety+testing,+hand+control+system+reliability+testing&ots=RWMMKqnkEa&sig=UUscGLu-k4hSd662l5gHrW8rwyc
[9] V. Vitiello, A. Benazzi, and P. Trucillo, “Smart Card-Based Vehicle Ignition Systems: Security, Regulatory Compliance, Drug and Impairment Detection, Through Advanced Materials and …,” Processes, 2025. https://www.mdpi.com/2227-9717/13/3/911
[10] S. McLachlan, M. Neil, K. Dube, and R. Bogani…, “Smart automotive technology adherence to the law:(de) constructing road rules for autonomous system development, verification and safety,” 2021. https://academic.oup.com/ijlit/article-abstract/29/4/255/6534108
[11] H. Noun, and C. Urban-Seelmann…, “Creation of Testing Processes for a Verification of Safety Relevant Vehicle Systems,” 2023. https://ieeexplore.ieee.org/abstract/document/10381312/
[12] M. Krichen, “Formal methods and validation techniques for ensuring automotive systems security,” Information, 2023. https://www.mdpi.com/2078-2489/14/12/666
[13] H. Alghodhaifi, and S. Lakshmanan, “Autonomous vehicle evaluation: A comprehensive survey on modeling and simulation approaches,” Ieee Access, 2021. https://ieeexplore.ieee.org/abstract/document/9605690/
[14] S. Kuutti, R. Bowden, Y. Jin, and P. Barber…, “A survey of deep learning applications to autonomous vehicle control,” 2020. https://ieeexplore.ieee.org/abstract/document/8951131/
[15] A. SAIDU, “DEVELOPMENT OF ELECTRONIC BRAKING SYSTEMS TROUBLESHOOTING AND MAINTENANCE MANUAL FOR AUTOMOBILE CRAFTSMEN IN NIGERIA,” irepo.futminna.edu.ng, 2023. http://irepo.futminna.edu.ng:8080/jspui/handle/123456789/19468
[16] S. Riedmaier, T. Ponn, D. Ludwig, and B. Schick…, “Survey on scenario-based safety assessment of automated vehicles,” 2020. https://ieeexplore.ieee.org/abstract/document/9090897/
[17] D. Andronas, E. Kampourakis, and G. Papadopoulos…, “Towards seamless collaboration of humans and high-payload robots: an automotive case study,” 2023. https://www.sciencedirect.com/science/article/pii/S0736584523000200
[18] L. Yu, and R. Wang, “Researches on Adaptive Cruise Control system: A state of the art review,” 2022. https://journals.sagepub.com/doi/abs/10.1177/09544070211019254
Raxmonova, G. S. (2022). O ‘QUVCHILARDA NOSTANDART TAFAKKUR TARZINI RIVOJLANTIRISHNING REFLEKSIV MEXANIZMLARI. Research And Education, 1(9), 542-549.
Rahmonova Gulchehra Salaydinovna (2022). PEDAGOGICAL-PSYCHOLOGICAL FEATURES OF THE DEVELOPMENT OF NON-STANDARD WAY OF THINKING IN STUDENTS. European science review, (3-4), 17-20.
Rahmonova, G. S. (2022). THEORETICAL AND METHODOLOGICAL FUNDAMENTALS OF DEVELOPING NON-STANDARD THINKING IN STUDENTS. Theoretical & Applied Science, (4), 565-572.
Raxmonova, G. (2020). ТАЛАБАЛАРДА МАЪНАВИЙ-АХЛОҚИЙ КОМПЕТЕНЦИЯЛАРНИ РИВОЖЛАНТИРИШ УСУЛЛАРИ. ЦЕНТР НАУЧНЫХ ПУБЛИКАЦИЙ (buxdu. uz), 4(4).
RAXMONOVA, G. MA’NAVIYAT-JAMIYAT RIVOJLANISHINING MUHIM OMILI. ЭКОНОМИКА, 159-161.
O‘zbekiston Respublikasi, Andijon viloyati, Shahrixon tumani
(+998) 945668868